Do you have a question ?
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
|
info@velvetsound.net |
|
+420 603 481 984 |
The "MicPre 5.0" is a complete single channel microphone preamp that offers features and flexibility for use in the most serious recording applications.
The signal path consists of a matched discrete transistor front-end, premium IC's, and transformer output stage. With the push of a button, the MP5.0 can change from an "Transformer-Balanced" output to a "Active-Balanced" output.
The compact 1/2 rack format of the MP5.0 can easily be rack mounted and combined with the Speck Model ASC equalizer to create a highly functional outboard channel strip.
The MicPre 5.0 also includes a mix section that makes it perfect for DAW's and remote recording.
The MP5.0 is more than a mic pre. It gives you a surprising number of signal routing alternatives. Just use your imagination when plugging up the MP5.0.
Since the MP5.0 works with balanced or unbalanced gear, you will not be stuck looking for the proper cable or worrying about level compatibility between dissimilar gear.
The mix section of the MicPre 5.0 provides a separate left/right mix out with level, pan and mute.
With only a simple interface cable, this mix section, or "Mix Node" can be linked with any number of MP5.0's to form a fully integrated mix section.
In many situations such as desktop or location recording, this expandable feature of the MP5.0 can eliminate the need for a separate audio mixer.
The signal path consists of a matched discrete transistor front-end, premium IC's, and transformer output stage. With the push of a button, the MP5.0 can change from an "Transformer-Balanced" output to a "Active-Balanced" output.
The compact 1/2 rack format of the MP5.0 can easily be rack mounted and combined with the Speck Model ASC equalizer to create a highly functional outboard channel strip.
The MicPre 5.0 also includes a mix section that makes it perfect for DAW's and remote recording.
The MP5.0 is more than a mic pre. It gives you a surprising number of signal routing alternatives. Just use your imagination when plugging up the MP5.0.
Since the MP5.0 works with balanced or unbalanced gear, you will not be stuck looking for the proper cable or worrying about level compatibility between dissimilar gear.
The mix section of the MicPre 5.0 provides a separate left/right mix out with level, pan and mute.
With only a simple interface cable, this mix section, or "Mix Node" can be linked with any number of MP5.0's to form a fully integrated mix section.
In many situations such as desktop or location recording, this expandable feature of the MP5.0 can eliminate the need for a separate audio mixer.
| Gain Range (Mic) | |
| 70 dB total | |
| +10 to +60dB in 5dB steps | |
| -10/+10 variable trim | |
| Gain Range (D.I.) | |
| -20 to +40 dB in 5 dB steps | |
| THD+N (Gain +40, Output +12dBu) | |
| 002% nominal | |
| Noise EIN (22Hz-22kHz) | |
| -126 dBu (150 ohm, 60dB gain) | |
| Freqency Response | |
| 10Hz-200kHz (+0/-3dB) | |
| Mic input impedence(10Kz) | |
| 4.6k ohms | |
| D.I. input impedence | |
| 50k ohms | |
| Maximum input level | |
| +18dBu (without pad) | |
| +30dBu (with 20dB pad in) | |
| Max. output level (10k load) | |
| +28dBu at active outputs | |
| +24dBu at transformer output | |
| HP Filter | |
| 30Hz-250Hz (12dB/octave) | |
| Phantom Power | |
| +48V regulated | |
| Dimensions | |
| HxWxD=1.75" x 8.5" x 8.00" | |
| (44mm x 216mm x 203mm) | |
| Shipping Weight | |
| 6Lbs (2.7kg) | |
| Power Requirements | |
| 100-120 VAC 50-60Hz | |
| 220-240 VAC 50-60Hz | |
