Do you have a question ?
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
|
info@velvetsound.net |
|
+420 603 481 984 |
The SMP-2 will bring your recordings to a new sound quality level. Its ability to capture all the intimate details, depth, clarity and realism of the recorded source, makes it an ideal choice for any type of professional studio or location recording.
To share our own experience: during the years, we have been in search for an ultimate preamp that would be able to truly capture all the living details of the recorded performance. We have worked with most of the well-known preamp brands. Still, while sounding very good, there was always \"something\" we missed in all of them. When we got SMP-2 preamp (that time it was just a prototype), it became an experience beyond any expectation - finally we heard all our instruments and vocals as never before: full, big, clean sounding, without any usual limiting artifacts - simply like through a big, open window. The sound that was uncomparable with any other preamp we have tried before. It was more than obvious that our preamp search was over ...
The SMP-2 circuitry features an all Class A discrete JFET design with a gain range of +6 to +68 dB in 24 switched steps.
Each channel has P48 Phantom powered inputs and Direct Coupled (DC) inputs for microphones that do not require P48 power.
Front panel signal level indicators are provided for each channel to indicate –5 dBu dBu output level (green) and output clipping (red).
Level indicators are single bicolor LED.
Polarity Invert, Output Mute and Phantom Power (P48) switches for each channel are also located on the front panel along with LED status indicators for each switch. Audio connectors on the rear panel are high-quality Neutrik XLR connectors with gold-plated pins.
Gain: + 6 dB to + 70 dB (gain range from +15 to +78 dB optional) Input Impedance: 15k ohm Output Impedance 50 ohms Max output level : > +24 dBu in 600 ohm load Min Output Load: 600 ohm Frequency Response: +/- 1 dB 2 Hz to > 200 KHz (min gain) +/- 1 dB 2 Hz to 50 KHz (max gain) EIN: -129 dB (20 –22 KHz) or better THD+N > 0.003 % 22 Hz to 22 KHz, 0 dBu to +24 dBu IMD/DIM > 0.005% 0 dBu to +24 dBu Power Consumption: 15 watts max
