Do you have a question ?
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
info@velvetsound.net | |
+420 603 481 984 |
The SM 300 is acompact 3 way monitor. Capable of playing loud, and clear, and with excellent detail, the SM 300 is an ideal reference monitor. A tri-amplified speaker with internal DSP balance, the SM 300 has exceptional on and off axis response. The 8 \\\\\\\" kevlar LF transducer ensures that the lowest notes and upper mid transients are produced with detail and clarity. With the SM 300, your need for a single monitor for high quality recording and post in are adequately met.
DESCRIPTION
3 way active studio monitor
3 way active studio monitor
ENCLOSURE Sides: Extruded aluminium, Top/bottom/front/rear: MDF, vented
TRANSDUCER COMPLEMENTS: HF Magnetically shielded 25mm silk dome tweeter
TRANSDUCER COMPLEMENTS: MF Magnetically shielded 4\\\\\\\" kevlar cone midrange
TRANSDUCER COMPLEMENTS: LF Magnetically shielded 8\\\\\\\" kevlar cone woofer
AMPLIFIER POWER BEFORE CLIPPING LF: 150 W, MF: 75 W, HF: 75 W
AMPLIFIER THD AT RATED POWER
< 0.1%
MAX SPL @ 1M
116 dB
OVERALL FREQUENCY RESPONSE (+/-2 DB)
40 Hz ~ 22 kHz
USABLE FREQUENCY RANGE (-10 DB)
35 Hz ~ 27 kHz (-10 dB)
CROSSOVER FREQUENCY
400 Hz, 4 kHz
CMRR
> 70 dB
INPUTS
Fully balanced XLR socket with link
INPUT LEVEL FOR 90 DB SPL @ 1M
+6 dBu, with gain at mid position
CONTROLS
Front: 2 bass roll-off DIP switches - 80 Hz & 100 Hz
PROTECTION
Overcurrent, overheat, RFI, switch-on/off transients
INDICATOR
Power ON /OFF
GAIN CONTROL RANGE
-20 dB ~ +8 dB
HIGH SHELVING EQ
4 kHz ~ 20 kHz, -3 dB to +3 dB in 0.75 dB steps
LOW SHELVING EQ
50 Hz ~ 250 Hz, -3 dB to +3 dB in 0.75 dB step
BASS ROLL-OFF
2 bass roll-off DIP switches: 80 Hz and 100 Hz
SIGNAL TO NOISE RATIO (AT UNITY GAIN)
> 95 dB, referred to full output
FINISH
Black painted
COLOURS
Black
DIMENSIONS (HXWXD) MM
300 x 508 x 295
POWER CONSUMPTION
480 VA max
POWER REQUIREMENT
Two versions: 230 V AC and 120 V AC, +/- 10%
NET WEIGHT
25 kg
MOUNTING OPTIONS
4 x M6 inserts on bottom plate