Máte na nás dotaz?
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
|
info@velvetsound.net |
|
+420 603 481 984 |
JZ Microphones The Michael Wagener Kit
| Orientační cena bez DPH |
25 575 CZK1 023 EUR |
|---|---|
| Cena s DPH |
30 946 CZK1 238 EUR |
Sada kondenzátorových mikrofonů
Mikrofonní sada nesoucí jméno legendárního zvukového inženýra Michaela Wagenera ((Metallica, Ozzy Osbourne, Alice Cooper...) obsahuje malomebránový kondenzátorový mikrofon BT-201 (s kardioidní směrovou charakteristikou) a limitovanou edici kondenzátorového mikrofonu BT-301 s membránou střední velikosti. Michael Wagener používá tuto kombinaci pro snímání overheadů a pro nahrávání akustické kytary.
BT-301 specifications
Transducer type: electrostatic condenser
Operating principal: pressure gradient
Diaphragms active diameter: 21mm
Frequency range: 20 Hz to 20 kHz
Polar pattern: cardioid
Output impedance: 50 ohms
Rated load impedance: 1000 ohms
Suggested load impedance: >500 ohms
Sensitivity at 1000 Hz into 1000 ohms load: 33mV/Pa
S/N Ratio CCIR 468-3 weighted: 76 dB
S/N Ratio DIN/IEC 651 A-weighted: 87 db-A
Equivalent noise level DIN/IEC A-weighted: 5,5 dB-A
Maximum SPL for 0.5% THD at 1000 ohm load: 133,5 dB
Dynamic range of the microphone preamplifier: 128 db
Phantom powering voltage on pins 2 & 3 of XLR: +48 V (+/-4 V)
Current consumption: < 2 mA
Output connector: 3-pin XLR male, gold plated contacts
Signal polarity: positive toward pressure on a diaphragm produces positive polarity voltage on XLR pin #2relatively to pin #3
BT- 201 specifications
Transducer type: electrostatic
Operating principal: pressure gradient
Diaphragms active diameter: 25 mm
Frequency range: 20 Hz to 20 kHz
Polar pattern: cardioid
Output impedance: 50 ohms
Rated load impedance: 1000 ohms
Suggested load impedance: > 500 ohms
Sensitivity at 1000 Hz into 1000 ohms load: 22 mV/Pa
S/N Ratio CCIR 468-3 weighted: 76 dB
S/N Ratio DIN/IEC 651 A-weighted: 87 db-A
Equivalent noise level DIN/IEC A-weighted: 6 dB-A
Maximum SPL for 0.5% THD at 1000 ohm load: 134 dB
Dynamic range of the microphone preamplifier: 128 db
Phantom powering voltage on pins 2 & 3 of XLR: +48 V (+/-4 V)
Current consumption: < 2 mA
Output connector: 3-pin XLR male, gold plated contacts
Signal polarity: positive toward pressure on a diaphragm produces positive polarity voltage on XLR pin #2 relatively to pin #3
