Do you have a question ?
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
|
info@velvetsound.net |
|
+420 603 481 984 |
Analogue Mastering Matrix
8 stereo hardware units in your favourite order
Integrate all your hardware for sum processing with the Konnektor in your favourite order. Full analogue signal path. Connect up to 8 analogue stereo units. Arrange your signal path by drag & drop inside of your DAW.
Total recall with the DAW-Plug-In
Save your settings with the plug-in in each song. Create presets with your favourite combinations. Do you always start your mastering with the same devices? With the presets you’re ready to go! Test different order settings by stepping the presets. What sounds better, the EQ in front of the compressor or the other way around? It only takes a second to find it out.
Build in LR->MS- and MS→LR-Matrix
The Konnektor offers additionally two analogue hardware plug-ins for LR->MS and MS→LR-encoding. You like to make the bass mono compatible with the hardware EQ? No problem at all. Drag the LR->MS plug-in before the EQ in your signal path and the MS->LR plug-in after the EQ. Now turn the bass down in the right channel of the EQ. Done. Now do you like to compress the mid and the side signal? Insert your compressor before the MS->LR plug-in. Do you like the EQ after the compressor? Just move the compressor up one slot. The rest adapts automatically.
Upload the images of your hardware
Upload the images of your hardware into the Konnektor. Now your virtual rack looks like your studio. The images of all of our products are Pre-installed already.
- Controllable by the webpage of the Konnektor or by plug-in (VST, AU, AAX)
- Analog plug-in MS->LR and LR→MS
- Full analogue signal path
- Digital controlled
- Total recall
- Minimum system requirements: Windows 7 or Mac OS X 10.7 (Pro Tools 11 and above)
- XLR main input and output to the mixbus
- 2x8 inputs and outputs sub D connector (XLR or TRS via cable, Tascam layout)
- Connection by network to the DAW
- Internal power supply
- Height: 88,1mm (2HE), width: 483mm, depth: 250mm
- Frequency Response: 10Hz – 30kHz
- Maximum Input Level: +22 dBu
- Input Impedance: ≥ 10kΩ
- Output Impedance: < 600 Ω
- Maximum Output Level: +24 dBu
- Dynamic Range: ≥ 110 dB
- Voltage: 110- 240 V~/50-60 Hz
- Fuse: 500mA slow-blow
- Maximum Power Consumption: < 25 W
- Dimensions: 2 U, H:132 mm, W:483 mm, D:250 mm
