Do you have a question ?
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
|
info@velvetsound.net |
|
+420 603 481 984 |
The Quested VQ3110 Walnut burl is the HiFi edition of Quested’s three-way active midfield monitor, finished in walnut burl veneer. It brings the performance of the company’s flagship Q-Series into a self-powered speaker that needs no external amplifier – simply connect a source or a preamplifier.
The result of three years of development, the VQ3110 builds on the V3110 with a new tweeter and a custom 3″ (76 mm) soft-dome midrange driver, designed to work with a custom 10″ (250 mm) bass driver. A hybrid amplifier drives the system: Class D delivers over 700 W RMS to the bass driver, while an upgraded Class AB stage provides over 400 W RMS for the mid and high frequencies with plenty of headroom.
Key features:
- Active three-way design with built-in hybrid amplification
- 10″ bass driver, custom 3″ soft-dome mid and new tweeter
- Frequency response 34 Hz – 20 kHz ±2 dB, down to 30 Hz (−6 dB)
- Up to 116.5 dB continuous / 124 dB peak SPL
- LF / MF / HF EQ and 10-step input sensitivity on the rear panel
- Balanced XLR / ¼″ jack combo input
- Walnut burl veneer finish
Applications:
High-end home listening in larger living rooms and dedicated listening rooms, where deep bass and high dynamics are wanted without a separate subwoofer or power amplifier. The same speaker also serves as a midfield monitor in large control rooms, as a main monitor in smaller rooms, or as part of an Atmos / immersive system.
- Type: active 3-way speaker (HiFi edition)
- Drivers: 1× 250 mm (10″) bass cone, 1× 76 mm (3″) soft-dome mid, new HF unit
- Amplification: LF >700 W RMS (Class D); MF >200 W RMS, HF >200 W RMS (Class AB)
- Frequency response: 34 Hz – 20 kHz ±2 dB; 30 Hz at −6 dB
- Max SPL: 116.5 dB continuous pink noise; 124 dB peak (music)
- Crossover: 457 Hz and 2.6 kHz, 24 dB/oct
- THD: typ. 0.03 % (1 dB below clip); typ. 0.005 % @ 20 W, 1 kHz
- Hum & noise: better than −100 dB ref. clip
- Input: XLR / ¼″ jack combo, 10 kΩ, electronically balanced
- Input sensitivity: +4 dBu to −14 dBu for 100 dB SPL @ 1 m (10-position switch, 2 dB steps)
- EQ: LF flat / −3 / −9 dB below 100 Hz, +1 dB below 80 Hz; MF ±1 dB; HF ±1 dB
- Subsonic filter: −3 dB @ 14 Hz, 24 dB/oct
- Mains: 115 / 230 V (internal), 50–60 Hz; consumption 72 W idle / 110 W typical / 195 W max
- Dimensions (W×H×D): 380 × 600 × 360 mm
- Weight: 41 kg
- Finish: walnut burl veneer
