Do you have a question ?
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
|
info@velvetsound.net |
|
+420 603 481 984 |
BT201|1 is a small diaphragm cardioid condenser microphone, offering optional choice of 3 capsules that satisfy the demands of all common studio and live applications - omni, open cardioid and open cardioid -20db option capsules. Matched pair is available to provide balanced stereo recordings. Also optional accessories JZI|7 and JZ|HLDR are recommended for BT201 series microphones.
Small diaphragm (13mm) condenser microphone
Class A discrete electronics
Cardioid polar pattern
5 year warranty
Small diaphragm (13mm) condenser microphone
Class A discrete electronics
Cardioid polar pattern
5 year warranty
Transducer type - electrostatic
Operating principal - pressure gradient
Diaphragms active diameter - 13 mm
Frequency range - 20 Hz to 20 kHz
Polar pattern - cardioid
Output impedance - 50 ohms
Rated load impedance - 1000 ohms
Suggested load impedance >250 ohms
Sensitivity at 1000 Hz into 1000 ohms load - 11 mV/Pa
S/N Ratio CCIR 468-3 weighted - 71 dB
S/N Ratio DIN/IEC 651 A-weighted - 82 db-A
Equivalent noise level DIN/IEC A-weighted - 12 dB-A
Maximum SPL for 0.5% THD at 1000 ohm load - 140 dB
Dynamic range of the microphone preamplifier - 128 db
Phantom powering voltage on pins 2 & 3 of XLR +48 V (+/-4 V)
Current consumption < 2 mA
Output connector 3-pin XLR male, gold platedcontacts
Signal polarity - positive toward pressure on a diaphragm produces positive polarity voltage on XLR pin #2relatively to pin #3
Dimensions 161,5 mm lenght x 24 mm diameter together with magneticly attached head, 140 g
Operating principal - pressure gradient
Diaphragms active diameter - 13 mm
Frequency range - 20 Hz to 20 kHz
Polar pattern - cardioid
Output impedance - 50 ohms
Rated load impedance - 1000 ohms
Suggested load impedance >250 ohms
Sensitivity at 1000 Hz into 1000 ohms load - 11 mV/Pa
S/N Ratio CCIR 468-3 weighted - 71 dB
S/N Ratio DIN/IEC 651 A-weighted - 82 db-A
Equivalent noise level DIN/IEC A-weighted - 12 dB-A
Maximum SPL for 0.5% THD at 1000 ohm load - 140 dB
Dynamic range of the microphone preamplifier - 128 db
Phantom powering voltage on pins 2 & 3 of XLR +48 V (+/-4 V)
Current consumption < 2 mA
Output connector 3-pin XLR male, gold platedcontacts
Signal polarity - positive toward pressure on a diaphragm produces positive polarity voltage on XLR pin #2relatively to pin #3
Dimensions 161,5 mm lenght x 24 mm diameter together with magneticly attached head, 140 g
