Do you have a question ?
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
|
info@velvetsound.net |
|
+420 603 481 984 |
BT201|3 is a small diaphragm condenser microphone, offering choice of 3 capsules that satisfy the demands of all common studio and live applications - cardioid, open cardioid and open cardioid -20db option capsules. Matched pair is available to provide balanced stereo recordings. Also optional accessories JZI|7 and JZ|HLDR are recommended for BT201 series microphones.
Small diaphragm (13mm) condenser microphone
Class A discrete electronics.
Cardioid, open cardioid, open cardioid with
-20 dB PAD polar patterns
5 year warranty
Small diaphragm (13mm) condenser microphone
Class A discrete electronics.
Cardioid, open cardioid, open cardioid with
-20 dB PAD polar patterns
5 year warranty
Transducer type electrostatic
Operating principal pressure gradient
Diaphragms active diameter 13 mm
Frequency range 20 Hz to 20 kHz
Polar pattern cardioid
Output impedance 50 ohms
Rated load impedance 1000 ohms
Suggested load impedance >250 ohms
Sensitivity at 1000 Hz into 1000 ohms load 11 mV/Pa
S/N Ratio CCIR 468-3 weighted 71 dB
S/N Ratio DIN/IEC 651 A-weighted 82 db-A
Equivalent noise level DIN/IEC A-weighted 12 dB-A
Maximum SPL for 0.5% THD at 1000 ohm load 140 dB
Dynamic range of the microphone preamplifier 128 db
Phantom powering voltage on pins 2 & 3 of XLR +48 V (+/-4 V)
Current consumption < 2 mA
Output connector
3-pin XLR male, gold plated contacts
Signal polarity positive toward pressure on a diaphragm produces positive polarity voltage on XLR pin #2relatively to pin #3
Dimensions 161,5 mm lenght x 24 mm diameter together with magneticly attached head, 140 g
Operating principal pressure gradient
Diaphragms active diameter 13 mm
Frequency range 20 Hz to 20 kHz
Polar pattern cardioid
Output impedance 50 ohms
Rated load impedance 1000 ohms
Suggested load impedance >250 ohms
Sensitivity at 1000 Hz into 1000 ohms load 11 mV/Pa
S/N Ratio CCIR 468-3 weighted 71 dB
S/N Ratio DIN/IEC 651 A-weighted 82 db-A
Equivalent noise level DIN/IEC A-weighted 12 dB-A
Maximum SPL for 0.5% THD at 1000 ohm load 140 dB
Dynamic range of the microphone preamplifier 128 db
Phantom powering voltage on pins 2 & 3 of XLR +48 V (+/-4 V)
Current consumption < 2 mA
Output connector
3-pin XLR male, gold plated contacts
Signal polarity positive toward pressure on a diaphragm produces positive polarity voltage on XLR pin #2relatively to pin #3
Dimensions 161,5 mm lenght x 24 mm diameter together with magneticly attached head, 140 g
