Do you have a question ?
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
|
info@velvetsound.net |
|
+420 603 481 984 |
The Trifon 3S is acoustically identical to the Trifon 3 . The volume used and the electronics are the same, except that an additional stand is not required for free-standing installation. In addition, the electronics are located in the plinth so that the connection cables can be conveniently laid close to the floor. The height of the tweeter is approx. 1.07 m, which is roughly the same height as your ear on a comfortable sofa. The feet in the stable base plate have an M6 thread and can be replaced with spikes, for example.
AMT Tweeter
The Air Motion Transformer (not to be confused with the visually similar \"ribbon\") is a special sound transducer whose basic principle was developed by Dr. Oskar Heil. Unlike conventional cone or dome tweeters, which in principle use a piston-like back and forth movement to displace or suck in air, here an accordion-like folded foil is moved in the magnetic field, which pushes air out of its gaps or sucks it in. This principle means that less mechanical material movement is required to generate the same sound pressure and acoustic distortions are reduced. Due to their geometric design, the sound of AMTs is somewhat more focused vertically as the frequency increases. This can have sonic advantages because reflections from the floor and ceiling are reduced.
- 2 1/2-way floorstanding speaker
- RMS power: 225 W
- Frequency response: 16…80 - >20.000 Hz
- High-frequency driver: AMT Tweeter
- Low frequency driver: 180 mm / 4 Ω
- Mid-bass driver: 180 mm / 4 Ω
- Net enclosure volume: 20,5 l
