česky english
HomepageBrandsJZ MicrophonesJZ Microphones DMK1

JZ Microphones DMK1

Price ex. VAT

755 EUR

Price incl. 21% VAT

914 EUR

How much is 9 + 6?

A general purpose of the JZ DMK1 is to use the mics for drum overheads and the kick drum both live and in the recording studio environment. 
 
 
JZ drum mic kit consists of three JZ BT201 small diaphragm condenser microphones: a matched pair with open cardioid capsules for overheads and a single mic with -20dB open cardioid capsule for kick drum.  The kit also includes JZ mic clips for all 3 mics and everything comes in a rigid carrying case so it is easy and safe to take the kit with you wherever you are going to record.
Transducer type: electrostatic
Operating principal: pressure gradient
Diaphragms active diameter: 13 mm
Frequency range: 20 Hz to 20 kHz
Polar pattern: Open cardioid, open cardioid -20dB
Output impedance: 50 ohms
Rated load impedance: 1000 ohms
Suggested load impedance: >250 ohms
Sensitivity at 1000 Hz into 1000 ohms load: 11 mV/Pa
S/N Ratio CCIR 468-3 weighted: 71 dB
S/N Ratio DIN/IEC 651 A-weighted: 82 db-A
Equivalent noise level DIN/IEC A-weighted: 12 dB-A
Maximum SPL for 0.5% THD at 1000 ohm load: 140 dB
Dynamic range of the microphone preamplifier: 128 db
Phantom powering voltage on pins 2 & 3 of XLR: +48 V (+/-4 V)
Current consumption: < 2 mA
Output connector: 3-pin XLR male, gold plated contacts
Signal polarity: positive toward pressure on a diaphragm produces positive polarity voltage on XLR pin #2relatively to pin #3




I want to register for receiving Velvet Sound newsletter