Do you have a question ?
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
|
info@velvetsound.net |
|
+420 603 481 984 |
JZ Microphones The Michael Wagener Kit
| Price ex. VAT |
1 023 EUR |
|---|---|
| Price incl. 21% VAT |
1 238 EUR |
The Michael Wagener kit includes BT-201 small diaphragm cardioid condenser and a limited edition BT-301 medium diaphragm condenser. The combination was discovered by legendary sound engineer Michael Wagener (Metallica, Ozzy Osbourne, Alice Cooper...) using microphones as a drum overheads and for a acoustic guitar recordings.
Michael Wagener (Metallica, Queen, Ozzy Ozbourne, Alice Cooper)
"I tried the combination of a BT201 and BT301 on acoustic guitar and it was the best sound I’ve heard from any new microphone."
Sound sample recorded by Augustin Amigo
BT-301 specifications
Transducer type: electrostatic condenser
Operating principal: pressure gradient
Diaphragms active diameter: 21mm
Frequency range: 20 Hz to 20 kHz
Polar pattern: cardioid
Output impedance: 50 ohms
Rated load impedance: 1000 ohms
Suggested load impedance: >500 ohms
Sensitivity at 1000 Hz into 1000 ohms load: 33mV/Pa
S/N Ratio CCIR 468-3 weighted: 76 dB
S/N Ratio DIN/IEC 651 A-weighted: 87 db-A
Equivalent noise level DIN/IEC A-weighted: 5,5 dB-A
Maximum SPL for 0.5% THD at 1000 ohm load: 133,5 dB
Dynamic range of the microphone preamplifier: 128 db
Phantom powering voltage on pins 2 & 3 of XLR: +48 V (+/-4 V)
Current consumption: < 2 mA
Output connector: 3-pin XLR male, gold plated contacts
Signal polarity: positive toward pressure on a diaphragm produces positive polarity voltage on XLR pin #2relatively to pin #3
BT- 201 specifications
Transducer type: electrostatic
Operating principal: pressure gradient
Diaphragms active diameter: 25 mm
Frequency range: 20 Hz to 20 kHz
Polar pattern: cardioid
Output impedance: 50 ohms
Rated load impedance: 1000 ohms
Suggested load impedance: > 500 ohms
Sensitivity at 1000 Hz into 1000 ohms load: 22 mV/Pa
S/N Ratio CCIR 468-3 weighted: 76 dB
S/N Ratio DIN/IEC 651 A-weighted: 87 db-A
Equivalent noise level DIN/IEC A-weighted: 6 dB-A
Maximum SPL for 0.5% THD at 1000 ohm load: 134 dB
Dynamic range of the microphone preamplifier: 128 db
Phantom powering voltage on pins 2 & 3 of XLR: +48 V (+/-4 V)
Current consumption: < 2 mA
Output connector: 3-pin XLR male, gold plated contacts
Signal polarity: positive toward pressure on a diaphragm produces positive polarity voltage on XLR pin #2 relatively to pin #3
