Do you have a question ?
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
|
info@velvetsound.net |
|
+420 603 481 984 |
Our top of the line, archival quality unit. The ULN-8 has the quality and features to handle the most demanding jobs. Perfect for everything from classical recording to the mastering suite, or any user that needs ultimate power and flexibility.
Building upon the experience gained with the Mobile I/O 2882 and ULN-2, we set out to design an integrated product to literally provide the best performance in each of its component sections while still providing all of the benefits of tight integration in a single field-capable package. The ULN-8 is the result of that development program.
The ULN-8 incorporates a number of new Metric Halo Audio technologies including:
- 192k sample rate support for both Analog and AES Inputs and Outputs
- New DC-coupled, zero phase distortion, servo balanced Line Inputs and Outputs
- ULN-R next generation remote controlled preamp technology. The Mic Pres in the ULN-8 build upon the audio performance pioneered by the ULN-2 preamp design with the additional benefit and technological innovation of full clickless remote control of the ULN Mic pre. This is accomplished with a sophisticated gain switching mechanism which incorporates Metric Halo "zero-cross" technology.
- Fully clickless remote controlled Monitor outputs. All ULN-8 analog outputs incorporate Metric Halo clickless remote technology allowing for flexible monitoring applications from stereo to 7.1 surround.
| Rails | |
| Preamp Rails | ±15.8 Volts |
| Analog Rails (low power) | ±9.9 Volts |
| Analog Rails (high power) | ±12.6 Volts |
| Phantom Power | 48 ± 0.1 Volts |
| Max Phantom Current Per Mic | 10 ma |
| Maximum I/O Levels (Balanced) | |
| Peak Line Output @ 0 dBFS (no jumper/low power) | +18.5 dBu |
| Peak Line Output @ 0 dBFS (output jumper/low power) | +22.0 dBu |
| Peak Line Output @ 0 dBFS (output jumper/high power) | +24.5 dBu |
| Analog Send Max Output | +21.5 dBu |
| Mic Pre Max Input | +20 dBu |
| Line In Max Input | +24.5 dBu |
| Output Impedance | 5 Ω |
| Monitor Controller | |
| Nominal FS output (Balanced) Output Jumper Off | -19.0 dBu |
| Nominal FS output (Balanced) Output Jumper On | -12.0 dBu |
| Maximum Output | Same as Line |
| Gain Range | -96 dB to +30 dB |
| Gain Precision | ±0.05 dB |
| Gain Step | 0.5 dB |
| Mic Pre Input + ADC | |
| Input Impedance | 3.3 kΩ |
| Dynamic Range (-60 dB, flat 0-22.05 kHz, typ) | 115 dB |
| Dynamic Range (-60 dB, A-weighted, typ) | 118 dB |
| Noise Floor (flat 0-22.05 kHz, typ) | 115 dB |
| Noise Floor (A-weighted, typ) | 117.9 dB |
| Gain Range | -22 dB to +91.5 dB |
| Gain Precision | ±0.05 dB |
| Gain Step | 0.5 dB |
| THD D/A/A/D loop @ -12 dBFS | 0.0007 % |
| THD D/A/A/D loop @ -12 dBFS +12 dB Gain | 0.0015 % |
| THD D/A/A/D loop @ -0 dBFS | 0.0023 % |
| Crosstalk @ 1kHz | -110dB |
| IMD 1k component (19 kHz/20kHz @ +8dBu) | -104 dBu |
| EIN @ 60 dB Gain (150Ω Source Impedance) | -130.50 dBu |
| EIN @ 60 dB Gain (0Ω Source Impedance) | -133.25 dBu |
| Analog Send Calibration (ADC = 0 dBFS) | +21.5 dBu |
| Phantom Power (Switchable Per Channel) | +48 Volts |
| Mic Pre + ADC Frequency Response | |
| +0/-0.1dB @ fs = 44100 Hz | 8.9 Hz - 20.5 kHz |
| +0/-1.0dB @ fs = 44100 Hz | 2.9 Hz - 21.0 kHz |
| +0/-0.1dB @ fs = 96000 Hz | 8.9 Hz - 43.9 kHz |
| +0/-1.0dB @ fs = 96000 Hz | 2.9 Hz - 45.4 kHz |
| +0/-0.1dB @ fs = 192000 Hz | 8.9 Hz - 42.1 kHz |
| +0/-1.0dB @ fs = 192000 Hz | 2.9 Hz - 64.7 kHz |
| 5° low-end in-channel phase deviation point | 20.0 Hz |
| Interchannel phase 0 Hz - 20 kHz | < ±0.05° |
| Crosstalk from SMPTE Input | < -142 dB |
| Line Input + ADC | |
| Input Impedance | 10 kΩ |
| Dynamic Range (-60 dB, flat 0-22.05 kHz, typ) | 115 dB |
| Dynamic Range (-60 dB, A-weighted, typ) | 118 dB |
| Noise Floor (flat 0-22.05 kHz, typ) | 115 dB |
| Noise Floor (A-weighted, typ) | 117.9 dB |
| THD D/A/A/D loop @ -12 dBFS | 0.0005 % |
| THD D/A/A/D loop @ -0 dBFS | 0.0015 % |
| Crosstalk @ 1kHz | -127 dB |
| IMD 1k component (19 kHz/20kHz @ +8dBu) | -104 dBu |
| Gain Range | -12 dB to +31.5 dB |
| Gain Precision | ±0.05 dB |
| Gain Step | 0.5 dB |
| Line Input + ADC Frequency Response | |
| +0/-0.1dB @ fs = 44100 Hz | 5.7 Hz - 20.5 kHz |
| +0/-1.0dB @ fs = 44100 Hz | 1.8 Hz - 21.0 kHz |
| +0/-0.1dB @ fs = 96000 Hz | 5.7 Hz - 43.9 kHz |
| +0/-1.0dB @ fs = 96000 Hz | 1.8 Hz - 45.4 kHz |
| +0/-0.1dB @ fs = 192000 Hz | 5.7 Hz - 42.1 kHz |
| +0/-1.0dB @ fs = 192000 Hz | 1.8 Hz - 64.7 kHz |
| 5° low-end in-channel phase deviation point | 10.7 Hz |
| Interchannel phase 0 Hz - 20 kHz | < ±0.05° |
| Crosstalk from SMPTE Input | < -142 dB |
| Input Processing | |
| M/S Decode | Instantiable |
| Parametric EQ | Instantiable |
| Dynamics | Instantiable |
| Limiting | Instantiable |
| Character | Instantiable |
| Transient Control | Instantiable |
| Reverb | Instantiable |
| Delay | Instantiable |
| Nearly Infinite Combinations via +DSP | Instantiable |
| Output Processing | |
| M/S Encode | Instantiable |
| Parametric EQ | Instantiable |
| Dynamics | Instantiable |
| Limiting | Instantiable |
| Character | Instantiable |
| Transient Control | Instantiable |
| Reverb | Instantiable |
| Dither | Instantiable |
| Mix Foldown | Instantiable |
| Signal Generation | Instantiable |
| Nearly Infinite Combinations via +DSP | Instantiable |
| Front Panel | |
| Indicator LEDs (Bicolor) | 495 |
| Meters | 16 |
| Segments per Meter | 15 |
| Channel Encoder Knobs | 8 |
| Encoders Have Shaft Push Buttons | Yes |
| Monitor Controller Encoder Knobs | 1 |
| Monitor Controller Mute | Yes |
| Monitor Controller Dim | Yes |
| Indicators Per Encoder | 16 |
| Sample Rate Indicators | 6 |
| Clock Source Indicators | 4 |
| AES Clock Source Indicators | 4 |
| AES Lock Indicators | 4 |
| AES Input Signal Indicators | 4 |
| AES Output Signal Indicators | 4 |
| System Lock Indicator | 1 |
| Firewire Indicator | 1 |
| Front Panel Modes | 14 |
| Headphone Output (Dedicated DAC) | TRS Stereo |
| DI Inputs (2) | TRS Balanced |
| DI Input Impedance | 10 MΩ |
| DI Input Fixed Gain (Jumper Selectable) | 0/10/20 dB |
| DI Input Variable Gain | -12 dB to 31.5 dB |
| Power Switch (Jumper Defeatable) | Toggle |
| Back Panel | |
| MIDI Connectors (In and Out) | 5-Pin DIN |
| SMPTE Connectors (In and Out) | Balanced TRS |
| Word Clock Connectors (In and Out) | 75Ω BNC |
| AES Connector (8 Channels In and Out) | DB-25 |
| AES Connector Pinout | Tascam/Digidesign Digital |
| Mic Input Connector (8 Channels) | DB-25 |
| Mic Input Pinout | Tascam/Digidesign Analog |
| Line Input Connector (8 Channels) | DB-25 |
| Line Input Pinout | Tascam/Digidesign Analog |
| Send Output Connector (8 Channels) | DB-25 |
| Send Output Pinout | Tascam/Digidesign Analog |
| Line/Monitor Output Connector (8 Channels) | DB-25 |
| Line/Monitor Output Pinout | Tascam/Digidesign Analog |
| Line/Monitor Mult Output Connectors (Analog 1/2) | TRS Balanced |
| FireWire Connectors (2) | 1394a 6-Pin |
| Power (Unswitched) | 2.1mm Coaxial |
| Power (Switched) | 4-Pin XLR |
| Security Slot | Kensington |
| Software | |
| Driver | CoreAudio Mac OS X |
| Mac OS X | 10.3.9 or newer |
| Architectures | PPC, Intel |
| MIO Console | Included |
| Record Panel | Included |
| LTC Decoder | Included |
| Mixer | Included |
| +DSP License | Included |
| Power | |
| Voltage | 14v - 28v |
| Power | 32 Watts |
| FireWire Bus Powerable | No |
| Passes FireWire Bus Power | Yes |
| Supplies FireWire Bus Power | No |
| External Supply (Input) | I00-240VAC |
| External Supply (Max Input Current) | 1.2 A |
| External Supply (Output) | 24 VDC |
| External Supply (Max Output Current) | 2.0 A |
| External Supply Connector | 4-Pin XLR |
| Case | |
| Material | Powder Coated Aluminum |
| Fasteners | 3mm Phillips Head |
| Weight | 6 lbs |
| Weight | 2.7 kg |
| Dimensions | 17" x 13" x 1.72" |
| Dimensions | 432 x 330 x 44 mm |
| Rack Ears (included) | Powder Coated Steel |
| Rear Rack Mounts | Available |
