_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
|
info@velvetsound.net |
|
+420 603 481 984 |
Gefell M92.1S
| Price ex. VAT |
2 240 EUR |
|---|---|
| Price incl. 21% VAT |
2 710 EUR |
| Dostupnost | skladem u dodavatele |
- legendary M7 capsule
- large diameter gold-plated plastic membrane
- tube preamplifier with EF86
The M 92.1 S is renowned for its high sensitivity and excellent signal-to-noise ratio. It has the typical warm, full-bodied sound of tube microphones that are preferred by vocalists and soloists.The M 92.1 S vacuum tube condenser microphone is suited for difficult radio play recordings as well as a supporting microphone for orchestra recordings. The renowned pressure gradient transducer of the M 92.1 S uses two large diameter gold-plated plastic dia-phragms. The vacuum tube preamplifier is equipped with a pentode working as a triode selected for its sonic characteristics.
The N 920.1 power supply provides the operating voltage for the vacuum tube condenser microphone. It can be powered from AC mains with a primary voltage of 115 or 230 volts / 50 or 60 Hz. For cable lengths over 50 meters it is recommended to have yourservice provider set the heater voltage of the power supply to 5.8 volts. The N 920.1 is equipped with an on/off-switch, a 7-pin Tuchel connector that powers the microphone and a 3-pin XLR connector with integrated line voltage selector.
http://www.microtechgefell.de/index.php/en/microphones/studio-a-recording/large-membrane-tube-mics/10-roehrenmikrofon-m921s
Tube-Condenser Microphone | M 92.1 S | |
Polar pattern | cardioid | |
Acoustical operating principle | Pressure gradient transducer | |
Frequency range | 40 ... 18000 Hz | |
Sensitivity at 1 kHz | 19 mV / Pa | |
Rated impedance | 200 Ω | |
Equivalent loudness level due to inherent noise | CCIR 468-4 (qps) | 25 dB |
DIN EN 60651 | 15 dB - A | |
Signal-to-noise ratio (re 1 Pa at 1 kHz) | CCIR-weighted | 69 dB |
A-weighted | 79 dB | |
Max. SPL for THD ≤ 0,5 % | 103 dB | |
Total dynamic range of the microphone amplifier | 106 dB | |
DC power supply | 120 V - | |
Anode current | 1 mA - | |
Heater voltage | 5,8 V - | |
Heater current | 200 mA - | |
Tube | EF 86 | |
Output connector | 7- pin Tuchel C 70 / A | |
Weight | 430 g | |
Dimensions (L x Ø ) | 197 mm x 42 mm |
http://www.microtechgefell.de/dmdocuments/M%2092.1%20S_ENG.pdf
