Do you have a question ?
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
|
info@velvetsound.net |
|
+420 603 481 984 |
An Over-Killer is an XLR barrel version of the same switchable soft-clip limiter found on our revered audio interfaces. Designed to get more out of your digital copy by allowing you to push levels while limiting the level of a balanced analogue signal to +18dBu.
The OVER-KILLER, with its unique super soft clip circuit, stays soft even when large overloads are present and does not become hard like less sophisticated systems.
The clip level is carefully set so that peak modulation is very close to the nominal maximum level. Many similar units lop off up to 1.25dB when switched into a circuit. With the flexibility of having the OVER-KILLER as an external unit, A/D input sensitivity can be separately trimmed to push even closer to peak code.
OVER-KILLERs are supplied as a set of two XLR barrels suitable for use with balanced stereo analogue signals.
Type: Passive XLR soft-clip limiter
- Connectors: 3-pin XLR male → XLR female (balanced)
- Channels: 2 units (stereo pair)
- Maximum input level: +18 dBu (balanced line level)
- Limiting technology: Analog “super soft clip” circuit
- Clipping accuracy: ≤ 0.1 dB below maximum level before clipping occurs
- Signal loss in bypass: < 0.1 dB
- Dimensions of one barrel module: approx. 90 × 25 mm
- Power supply: Not required (passive circuit)
- Compatibility: Suitable for all professional line-level audio systems (e.g. mixing consoles, converters, recorders)
