Do you have a question ?
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
|
info@velvetsound.net |
|
+420 603 481 984 |
The Quested H108 is a passive two-way near-field monitor and the smallest passive monitor in the Quested range. It is engineered to the same standards as Quested’s larger designs – with low distortion, accurate stereo imaging and a sound that stays free of listening fatigue even after hours of work.
Low frequencies are handled by a custom high-excursion 8″ (200 mm) bass driver, high frequencies by a 28 mm soft-dome tweeter with wide dispersion and low distortion. The passive crossover uses high-quality components and is deliberately kept simple to keep the signal path clean. The H108 is primarily designed for near-field listening or for placement on a console meter bridge. It can be used as a stand-alone stereo pair or as part of an immersive or Atmos system. Quested recommends an amplifier of 60 to 300 W RMS, such as the AP950-2.
Key features:
- Passive two-way near-field monitor
- Custom high-excursion 8″ bass driver
- 28 mm soft-dome tweeter with wide dispersion and low distortion
- Simple passive crossover with high-quality components
- Frequency response 65 Hz – 20 kHz ±2 dB
- Up to 107 dB continuous / 115 dB peak SPL
- Suitable for Atmos and immersive systems
- Type: passive 2-way near-field monitor
- Drivers: 1× 200 mm (8″) bass cone, 1× 28 mm (1⅛″) soft dome
- Frequency response: 65 Hz – 20 kHz ±2 dB; 46 Hz at −6 dB
- Max SPL: 107 dB continuous pink noise; 115 dB peak (music)
- Impedance: 8 Ω
- Sensitivity: 91 dB @ 1 m
- Recommended amplifier: 60–300 W RMS, e.g. AP950-2
- Connector: 1 pair of binding posts
- Dimensions (W×H×D): 240 × 404 × 277 mm
- Weight: 12 kg
