Do you have a question ?
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
|
info@velvetsound.net |
|
+420 603 481 984 |
Royer Labs R-122V vacuum tube ribbon microphone
| Price ex. VAT |
2 865 EUR |
|---|---|
| Price incl. 21% VAT |
3 467 EUR |
| Dostupnost | skladem u dodavatele |
The R-122V was the first commercially produced vacuum tube ribbon microphone available. Performance-wise, the R-122V falls in line with the R-121 and R-122. The tube offers 15dB more gain than the R-121 and 10dB more than the R-122, but the sound is pure Royer - familiar and natural. The increased output lets you be more flexible with which preamp you choose, as a high-gain preamp is no longer necessary to get sufficient signal. Long cable runs are no problem, thanks to the R-122V's power supply.
Same large-ribbon transducer as R-121 and R-122, but hotter
A limited production vacuum tube studio ribbon microphone, the R-122V utilizes the same large-ribbon transducer assembly that is found in the R-121 and R-122 Active Ribbon microphones - providing a familiarity of sonic performance associated with the R-Series microphones. The R-122V exhibits a flat frequency response and a well-balanced sound field, and provides an output of -36dB, which is approximately 15dB hotter than an R-121. Like its predecessors, the R-122V's ability to withstand high SPL levels makes it well suited for applications that were previously considered off limits to ribbon microphones.
Exceptionally high SPL handling capacity
The R-122V's offset-ribbon design positions the ribbon element toward the front of the microphone body. This design enables high SPL handling on the front (logo) side of the instrument, with the option of a slightly brighter response when recording via the microphone's back side (3 feet and closer; phase reversed in this position).
Military-grade 5840W tube
The R-122V's active electronics utilize a NOS (new old stock) U.S. built military 5840W vacuum tube and Royer's proprietary toroidal ribbon matching transformer (patent pending). A Jensen 8:1 ratio output transformer provides an electrically isolated, fully-balanced output signal. The R-122V can drive virtually any preamplifier and long cable runs (from power supply to preamp) with ease. The active circuitry provides optimum impedance to the ribbon element at all times, preventing over-damping of the ribbon element and assuring consistent microphone performance. The R-122V receives an extensive burning in procedure to assure proper settling of the vacuum tube.
Low mass aluminum ribbon
The R-122V employs a pure (99.99%), low mass, 2.5-micron thick aluminum ribbon. The R122V's unique, patented offset-ribbon transducer assembly incorporates rare earth Neodymium magnets in a specially designed flux frame, which forms a powerful magnetic field while reducing unwanted stray magnetic radiation. The smooth frequency response and phase linearity of the R-122V, coupled with its classic triode-connected vacuum tube circuitry, enable the R-122V to deliver a consistent acoustic performance with stunning realism according to the company. Frequency response is excellent, regardless of the angle of sound striking the ribbon, and off-axis coloration is negligible.
With an 18-carat gold finish, the new Royer Labs R-122V is a visually striking microphone. This microphone comes with a dedicated power supply and the included cable set is equipped with military grade locking type XLR connectors.
Acoustic Operating Principle: Electrodynamic pressure gradient with vacuum tube
electronics.
Vacuum Tube: JAN mil-spec 5840W pentode wired in triode configuration
Polar Pattern: Figure-8
Generating Element: 2.5-micron aluminum ribbon
Magnets: Rare Earth Neodymium
Frequency Response: 30 -15,000 Hz +/- 3dB
Sensitivity: -36 dB (re. 1v/pa +/- 1 dB)
Self-Noise: < 18 dB
Output Impedance: 200 Ohms, balanced
Rated Load Impedance: 1 K-Ohm
Maximum SPL: >135dB SPL @ 20 Hz
Power Requirements: Plate supply: 135 VDC @2ma, Filament supply: 6 VDC@ 150ma from dedicated power supply.
Dimensions: 206mm L, 25mm W (8 1/8 " L, 1" W).
Weight: 300g (10.9 oz )
Finish: Dull Satin Nickel/Matte Black Chrome optional
electronics.
Vacuum Tube: JAN mil-spec 5840W pentode wired in triode configuration
Polar Pattern: Figure-8
Generating Element: 2.5-micron aluminum ribbon
Magnets: Rare Earth Neodymium
Frequency Response: 30 -15,000 Hz +/- 3dB
Sensitivity: -36 dB (re. 1v/pa +/- 1 dB)
Self-Noise: < 18 dB
Output Impedance: 200 Ohms, balanced
Rated Load Impedance: 1 K-Ohm
Maximum SPL: >135dB SPL @ 20 Hz
Power Requirements: Plate supply: 135 VDC @2ma, Filament supply: 6 VDC@ 150ma from dedicated power supply.
Dimensions: 206mm L, 25mm W (8 1/8 " L, 1" W).
Weight: 300g (10.9 oz )
Finish: Dull Satin Nickel/Matte Black Chrome optional
