Do you have a question ?
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
|
info@velvetsound.net |
|
+420 603 481 984 |
The SRP 800 is excellent for loud monitoring without any audible loss in detail. The silk dome tweeter is nested in a custom waveguide to produce on and off axis linearity and a wide, detailed soundstage. The 8\\\\\\\" Kevlar woofer produces deep bass and exceptional transient response. A new 175W + 100W bi-amplifier drives the transducers optimally while providing adequate headroom and dynamics. The maximum SPL measures in at an impressive 112dB
SYSTEM
DESCRIPTION
2 way biamplifier speaker
ENCLOSURE
Pressure die cast aluminum, vented, through rear-firing aerodynamic port
TRANSDUCER COMPLEMENTS: HF
Magnetically shielded 26mm silk dome tweeter with custom waveguide
TRANSDUCER COMPLEMENTS: LF
Magnetically shielded 8 inch kevlar cone woofer in die-cast chassis
AMPLIFIER POWER BEFORE CLIPPING
LF: 150W, HF: 100W
AMPLIFIER THD AT RATED POWER
< 0.04%
MAX SPL AT 1M
112dB
FREQUENCY RESPONSE
42Hz ~ 22kHz (+/- 2dB)
FREQUENCY RANGE
37Hz ~ 25kHz (-10dB)
CROSSOVER FREQUENCY
1.8kHz
CMRR
>65dB
CONTROLS
INPUT
Fully balanced through XLR & Link sockets
INPUT LEVEL FOR 90dB SPL AT 1M
+7dBU
CONTROLS
Front: Power Switch and Gain Control; Rear: Low shelving, High shelving, Bass roll-off
GAIN CONTROL RANGE
-70dB ~ +10dB, 0dB at (detented) centre
HIGH SHELVING EQ
4kHz ~ 20kHz, -3dB ~ +3dB in 0.75dB steps
LOW SHELVING EQ
50Hz ~ 250Hz, -3dB ~ +3dB in 0.75dB steps
BASS ROLL-OFF
63Hz, 12dB/ octave
S/N RATIO (AT UNITY GAIN)
> 90dB, referred to full output
GENERAL
PROTECTION
Over current, Overheat , RFI, Switch on/ off transients
INDICATORS
Power ON /OFF
FINISH
Powder coated (grey)
POWER CONSUMPTION
345VA Max.
POWER REQUIREMENT
230VAC, ±10%, 50Hz, 120V optional
DIMENSIONS (WxHxD)
291 x 434 x 280 mm
NET WEIGHT
17kg
WALL MOUNT BRACKET
SRP WB3
MOUNTING OPTIONS
4 x M6 inserts on rear, 4 x M6 inserts on bottom
