Do you have a question ?
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
|
info@velvetsound.net |
|
+420 603 481 984 |
The SRP 600 adds loudness, clarity and bottom end to the compact SRP 500. The silk dome tweeter is nested in a custom waveguide to produce on and off axis linearity and a wide, detailed soundstage. The 6.5\\\\\\\" Kevlar woofer produces deep bass and exceptional transient response. A new 80W + 50W biamplifier drives the transducers optimally while providing adequate headroom and dynamics. The maximum SPL measures in at an impressive 107dB. The SRP 601 is a near field active reference monitor with very wide frequency and dynamic range.
SYSTEM
DESCRIPTION
2 way biamplified speaker
ENCLOSURE
Pressure die-cast aluminum, vented, through front-firing aerodynamic port
TRANSDUCER COMPLEMENTS: HF
26mm silk dome neodymium magnet tweeter with custom waveguide
TRANSDUCER COMPLEMENTS: LF
6.5 inch glass fibre cone woofer in die-cast chassis
AMPLIFIER POWER BEFORE CLIPPING
LF: 80W, HF: 50W
AMPLIFIER THD AT RATED POWER
< 0.04%
MAX SPL AT 1M
107dB
FREQUENCY RESPONSE
48Hz ~ 21kHz (+/-3dB)
FREQUENCY RANGE
42Hz ~ 25kHz (-10dB)
CROSSOVER FREQUENCY
2kHz
CMRR
>65 dB
CONTROLS
INPUT
Fully balanced through XLR & linked TRS sockets
INPUT LEVEL FOR 90dB SPL AT 1M
+7dBU
CONTROLS
Front: Power Switch and Gain Control; Rear: Bass tilt, Treble tilt, Bass roll-off
INDICATORS
Power ON /OFF
GAIN CONTROL RANGE
-70dB ~ +10dB, 0dB at (detented) centre
TREBLE TILT
-2dB at 15kHz
BASS TILT
-2dB , -4dB , -6dB at 80Hz
BASS ROLL-OFF
100 Hz, 6dB/octave
S/N RATIO (AT UNITY GAIN)
> 90dB, referred to full output
GENERAL
PROTECTION
Over current, Overheat , RFI, Switch on/ off transients
FINISH
Powder coated grey
POWER CONSUMPTION
175VA Max.
POWER REQUIREMENT
230VAC, ±10%, 50Hz, 120V optional
DIMENSIONS (WxHxD)
250 x 340 x 240 mm
NET WEIGHT
11.9kg
WALL MOUNT BRACKET
SRP WB2
MOUNTING OPTIONS
2 x M6 inserts on rear, 4 x M6 inserts on bottom
