Do you have a question ?
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
|
info@velvetsound.net |
|
+420 603 481 984 |
It is very handy and compact with absolutely originally looking design. It has new original stand holder system (damper) and patented variable sputtering of diaphragm, using specially mixed alloy for coating. The Black Hole is produced with three switchable polar patterns (Omni, Cardioid and Figure of 8). Designer of Black Hole is sure that the result will agreeably surprise every user.
Large diaphragm condenser microphone.
GDC2 capsule
Class A discrete electronics
3 polar patterns: cardioid, figure of 8, omni
5 year warranty
Large diaphragm condenser microphone.
GDC2 capsule
Class A discrete electronics
3 polar patterns: cardioid, figure of 8, omni
5 year warranty
BH1
Transducer type - electrostatic
Operating principal - pressure gradient
Diaphragms active diameter 2 x 27 mm
Frequency range 20 Hz to 20 kHz
Polar pattern Omni / Cardioid / Figure - 8
Output impedance 50 ohms
Rated load impedance >250 ohms
Suggested load impedance 1000 ohms
Sensitivity at 1000 Hz into 1000 ohms load 18 mV/Pa
S/N Ratio CCIR 468-3 weighted 75,5 dB
S/N Ratio DIN/IEC 651 A-weighted 86,5 db-A
Equivalent noise level DIN/IEC A-weighted 7,5 dB-A
Maximum SPL for 0.5% THD at 1000 ohm load 134,5 dB
Dynamic range of the microphone preamplifier 127 db
Phantom powering voltage on pins 2 & 3 of XLR +48 V (+/-4 V
Current consumption 1,5 mA
Output connector 3-pin XLR male, gold plated contacts
Signal polarity positive toward pressure on a frontal diaphragm produces positive polarity voltage on XLR pin #2 relatively to pin #3
Dimensions 203 x 51 x 28
Transducer type - electrostatic
Operating principal - pressure gradient
Diaphragms active diameter 2 x 27 mm
Frequency range 20 Hz to 20 kHz
Polar pattern Omni / Cardioid / Figure - 8
Output impedance 50 ohms
Rated load impedance >250 ohms
Suggested load impedance 1000 ohms
Sensitivity at 1000 Hz into 1000 ohms load 18 mV/Pa
S/N Ratio CCIR 468-3 weighted 75,5 dB
S/N Ratio DIN/IEC 651 A-weighted 86,5 db-A
Equivalent noise level DIN/IEC A-weighted 7,5 dB-A
Maximum SPL for 0.5% THD at 1000 ohm load 134,5 dB
Dynamic range of the microphone preamplifier 127 db
Phantom powering voltage on pins 2 & 3 of XLR +48 V (+/-4 V
Current consumption 1,5 mA
Output connector 3-pin XLR male, gold plated contacts
Signal polarity positive toward pressure on a frontal diaphragm produces positive polarity voltage on XLR pin #2 relatively to pin #3
Dimensions 203 x 51 x 28
